TOPPING DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC DAC AMP NFCA Headphone Amplifier

Description

Store Categories
Store Categories
Decoder
Desktop decoder
Portable decoder
Amplifier
Player
Earphones
Cables
Interface
Earbuds
Receiver
Accessories
Speaker
Other
TOPPING DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC DAC AMP NFCA Headphone Amplifier
Product Description
Product Highlights:
Four output modes: Headphone Amp, Headphone Amp+Line out, DAC, and Pre-amplifier.
QCC5125 chipset, supports LDACIAAC/SBCIAPTXIAPTX LL/APTX HD protocol
2nd generation 8 core XMOS XU208, USB input supports up to PCM32bit768kHz and DSD512 native
Optimized NFCA circuit, with ultra low noise and distortion
32ohm load: 1800mW x2 | 300ohm load: 250mW x2
Two gain settings, +6dB Lo Gain | +19dB Hi Gain
DX3 Pro+ ：
Bluetooth
：QCC5125
THD+N (DAC)：
0.00015%
THD+N (HPA)
：0.00015%@1500mW (32ohm)
Output power：1800mWx2@32ohm
250mWx2@300ohm
Output impedance
：<0.1ohm
Bluetooth 5.0 L
DAC transmission
：
DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It use newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol.To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
NFCA circuit：
The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
Pre-amplifier function：
Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp，Headphone Amp+Line out, DAC, and Pre amplifier.
PA3s is the best power amplifier for DX3 Pro+：
PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x 2@4Ω,10%THD+N, 65W X 2@4Ω, 1%THD+N can be adapted to most situations where speakers are used.
Bl
uetooth headphone amp /Bluetooth D
AC application
：
Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output,then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience.
Copyright © 2018 Dianxiaomi