-40%
Russound D250LS Low Profile Amplifier
Russound D250LS Low Profile Amplifier

Russound D250LS Low Profile Amplifier

$ 89.23

Availability: 69 in stock
  • Return shipping will be paid by: Seller
  • Item must be returned within: 60 Days
  • Number of Channels: 2
  • Brand: Russound
  • Condition: These items are briefly used products that Crutchfield customers have returned during our 60 day satisfaction guarantee period. Before being offered for resale, each item gets a thorough inspection by our returns-processing technicians. While all items are fully functioning, some items may have minor cosmetic damage such as small scratches or dents. Others may have damaged product packaging, or may be packaged in generic boxes. They may be missing non-essential accessories. In rare cases the included accessories may be replaced with generic equivalents. TVs or other products with screens do not have scratches or imperfections on the screen itself. The full manufacturer's warranty still applies. All items are covered by Crutchfield's 60-day satisfaction guarantee with free returns ability.
  • MPN: 2800533280
  • Type: Power Amplifier
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • UPC: 612934533280

    Description

    Product highlights
    50 watts per channel into 8 ohms (1,000 Hz) at 0.3% THD with 2 channels driven
    75 watts per channel into 4 ohms
    bridged mono mode delivers 150 watts x 1 into 8 ohms
    robust protection circuitry
    primary and secondary speaker-level inputs with automatic source switching
    "default in" for integrating a whole-house system
    "amplified in" switches on when a signal from a local source is detected
    sensing inputs activate the amplifier when a signal is detected
    1 pair of analog stereo RCA inputs
    1 composite video input activates amp when TV signal is present
    two pairs of speaker outputs (A and B); 8-ohm minimum impedance for driving two pairs of speakers
    delay control (5 seconds to 4.5 minutes) determines when amp switches to default input with absence of secondary input signal
    independent left and right gain controls
    space-saving low-profile design
    total harmonic distortion: less than 0.3% (20-20,000Hz into 8 ohms at 50 watts per channel)
    12-volt trigger in/out
    rack- or wall-mountable with included hardware (rack-mount ears, wall brackets, and attachment screws)
    detachable power cable
    8-1/2"W x 1-3/4"H x 10-1/2"D
    weight: 4.65 lbs.
    warranty: 3 years
    What's in the box
    Stereo amplifier
    6' AC power cord
    4 Self-adhesive rubber feet
    Long bracket
    2 Short brackets
    Bracket plate
    6 pan-head machine screws
    5 Counter-sunk machine screws
    Installation Manual
    About this item
    Written by Crutchfield's David Brown
    A smart solution for integrating multi-room audio with another source
    The Russound D250LS is more than just a simple two-channel power amp. It's designed for use with multiple sources across more than one room. It has speaker-level inputs for default and secondary sources as well as line-level inputs for a TV or computer. This amp is great for use with a multi-room music system while allowing you to override multi-room output in a single room with a local source.
    For instance, let's say you have a home theater receiver with speaker-level outputs for a second zone. You could run speaker wire from the receiver directly to stereo speakers in your bedroom. That's great, but what about when you want to watch TV? The D250LS lets you use those same speakers for your TV as well. You can connect your receiver to the default speaker-level inputs on the back of this amp. Whenever you activate Zone 2 on your receiver, the amp will power on and you'll enjoy music in your bedroom. Then, you connect your TV's audio/video outputs to the amp, which will detect your TV's signal and switch the speakers to the TV automatically. When you turn off the TV, the amp will switch back to the default inputs. The timing of the switch can be customized with the rear-panel delay knob.
    Bridged mono mode for more power
    The Russound D250LS can power one or two pairs of speakers. Use it in stereo mode, or you can add a second amp and bridge them for a more powerful dual-mono setup. This amp's low-profile design makes it easy to place in a room where space is tight. Place it on a shelf or stand, mount it on the wall, or rack mount one or multiple units with the included hardware.