-40%
Rolls RA170 Power Amplifier, 70W, 70A, 1 Rack Unit
$ 131.47
- Description
- Size Guide
Description
The Rolls RA170 Power Amplifier was designed especially for the installation contractor. The RA170 is a single rack-space, mono unit with a choice of an RCA or 1/4" unbalanced input. The 70 volt speaker outputs are provided via spring-loaded terminals - no transformer is required for speaker connection. The front panel includes a Power indicator LED, a Volume control, and two Clip LEDs which indicate circuitry overload. The output circuitry is protected from momentary shorting and excessive load by a specially designed protective circuit.Rolls RA170 Features:
Balanced 70V line output
Drives 70V speakers directly
RCA or 1/4" inputs
Spring-loaded output
Clip indicator
Rolls RA170 Specifications:
Recommended Load: 70 volt line (70 watts maximum)
Frequency Response: 70 Hz - 20 kHz
Equiv. Input Noise: 100 µV typical, A weighted, 600 ohm input
S/N Ratio: 114 dB @ 70 Watts
Gain: 40 dB
Input Impedance: 47 kOhms
Size (WxHxD): 19" x 1.75" x 5"
Weight: 5.5 lbs.