Pro-Ject Tube Box DS2 Pipes Phono Pre-amplifier Preamplifier IN Silver MM Mi Mc

Description

Pro-Ject Tube Box DS2 Pipes Phono Pre-amplifier Preamplifier IN Silver MM Mi Mc
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Tube phono pre-amplifier
Pro-Ject Tube Box DS2 in silver
2x double triode ECC83 (12AX7)
For 2 turntables or 2 tonearms
For MM, MI and MC cartridges
Gain adjustable in five steps
Adjustable resistance and capacitance
Switchable subsonic filter
External power supply reduces interference
That roars a lot!
An external phono preamplifier is indispensable if the existing amplifier does not have a connection for a turntable or if the built-in phono preamplifier does not meet the quality requirements of the music lover. The connection is then made to a high level input of the amplifier. Each pickup plays best in the optimal electrical environment. It is therefore an advantage if a phono preamplifier can be sensitively adjusted to the requirements of the pickup in terms of the terminating capacitance, the terminating resistor and its gain.
The two ECC83 tubes (internationally known as 12AX7) protruding from the top of the housing for better heat dissipation (and a nicer look) are high-quality double triodes based on a hundred thousand standard. The supply of these tubes is absolutely assured. In the Pro-Ject Tube Box DS2 they are also equipped with an elaborate damping element,
that at the same time the
additional
Cooling is used,
Protected from vibrations that can damage the sound
.
Two inputs and outputs: This enables operation with two turntables or a turntable with two tonearms and the connection of two amplifiers. The device has a variety of setting options for the termination capacity of MM, moving iron and high-output MC cartridges as well as the terminating resistor for low-output MC cartridges. The terminating resistor for low-output MC cartridges can be continuously adjusted while listening with the rotary control on the front of the device. The gain can be adjusted in five steps. The setting of the gain is not linked to an operating mode. All settings can be used for the operating modes MM and MC.
The settings for adapting MM, moving iron and high-output MC cartridges, the amplification and those of the subsonic filter can be created and saved individually for both inputs. When you select an input, the saved settings are loaded automatically. The individually created settings are stored in a permanent memory, so they are not lost, even if the device is disconnected from the power supply.
execution
The Pro-Ject Tube Box DS2 has a housing made of brushed aluminum in silver.
Technology for good sound
Two double triodes of type ECC83 (12AX7)
Terminating capacitance and terminating resistance adjustable:
Terminating resistor: continuously 10 to 1,000 ohms (low-output MC cartridge)
Terminating capacitance / resistance: 47pF, 147pF, 267pF and 367pF / 47kOhm (high-output MC, moving iron and MM cartridges)
Gain: 40dB, 45dB, 50dB, 60dB and 65dB
Switchable subsonic filter
Outsourced power supply unit (included)
Technical specifications
Dimensions W x H x D (D with sockets / rotary knob): 206 x 71 x 194 (230) mm. W x H device with wooden panels: 240 x 72mm
Weight: 1.540g without power supply
An external phono preamplifier is indispensable if the existing amplifier does not have a connection for a turntable or if the built-in phono preamplifier does not meet the quality requirements of the music lover. The connection is then made to a high level input of the amplifier. Each pickup plays best in the optimal electrical environment. It is therefore an advantage if a phono preamplifier can be sensitively adjusted to the requirements of the pickup in terms of the terminating capacitance, the terminating resistor and its gain. Two inputs and outputs: This enables operation with two turntables or a turntable with two tonearms and the connection of two amplifiers. The device has a variety of setting options for the termination capacity of MM, moving iron and high-output MC cartridges a
Farbe
Silber
Marke
Pro-Ject
EAN
Nicht zutreffend
Produktart
Röhren Vorverstärker
Modell
DS2